1.铸造、锻造宏/微观模拟软件研究开发与工程应用，“高档数控机床与基础制造装备”科技重大专项课题 ( 2009ZX04014-082)， 2009.3-2010.12
2.镁合金精确铸造成形组织性能模拟，国家973项目（2006CB605208），2006.09- 2011.08
3.先进成形制造过程多尺度数字仿真与优化，国家973项目（2005CB724105），2005.12- 2010.12
4.铝合金铸件机械性能模拟研究，国家自然科学基金项目(50005011)，2001.01- 2003.12
5.支持产品创新的先进制造技术中的若干基础研究，国家自然科学基金重大项目( 59990470)，1999.10- 2002.12
6.金属材料热成形过程的动态模拟及组织性能的优化控制，国家攀登计划预选项目，1997.10- 2000.12
1. 柳百成, 荆涛等，《铸造工程的模拟仿真与质量控制》，机械工业出版社，2000年10月
2. 荆涛，《凝固过程数值模拟》，电子工业出版社，2002年5月
3. Wang mingyue, Jing Tao and Liu Baicheng, Phase-field simulation of dendrite morphologies and selected evolution of primary α-Mg phases during the solidification of Mg-rich Mg-Al-based alloys, Scripta Materialia, Volume 61, Issue 8, October 2009, Pages 777-780. （SCI-IDS 493EH，EI 20093312255561）
4. En-Yu Guo, Hu-xiaoXie, Sudhanshu S. Singh, Antony Kirubanandham, Tao Jing and Nikhilesh Chawla，“Mechanical Characterization of Microconstituents in a Cast Duplex Stainless Steel by Micropillar Compression”，Materials Science and Engineering A598（2014）98-105. （SCI-IDS AE1ZF，EI 20140617281510）DOI: 10.1016/j.msea.2014.01.002
5. Sansan Shuai, Enyu Guo, Tao Jing, Peter D. Lee, Fast synchrotron X-ray tomography quantification of the dendritic evolution during the solidification of Mg-Sn alloys, Acta Materialia 10/2016; 118:260-269. （SCI-IDS DW8WI）DOI: 10.1016/j.actamat.2016.07.047
6. Changjiang Ni, Gaochun Lu, Qingdong Zhang, Tao Jing, Junjiao Wu, Linlong Yang, Qinfang Wu, Influence of core box vents distribution on flow dynamics of core shooting process based on experiment and numerical simulation, China Foundry, 13(2016), 22-29. （SCI-IDS DN4MJ）DOI: 10.1007/s41230-016-5105-z
7. Kai Zhu, Wenbo Yu, Yann Aman, Tao Jing. Synthesis, microstructure and mechanical properties of a bio-inspired Ti-intermetallic multi-layered/SiCf-reinforced Ti-matrix hybrid composite. Journal of materials science, September 2016, Volume 51, Issue 18, pp 8747–8760. （SCI-IDS DQ2HO）DOI: 10.1007/s10853-016-0139-6
8. Qingdong Zhang, Sida Ma, Tao Jing, Mechanical Properties of a Thermally-aged Cast Duplex Stainless Steel by in Situ Tensile Test at the Service Temperature, Metals 2019, 9, no. 3, 317. （SCI-IDS HT0XI）DOI: 10.3390/met9030317
9. Xiong Wan, Kai Zhu, Yanjin Xu, Baoshuai Han, Tao Jing, In-situ observation of fracture behavior of Ti-aluminide multi-layered composites produced by a hybrid sintering process, Materials 2019，12（9），1568 （SCI-IDS IA7SV）DOI: 10.3390/ma12091568
10. 缪家明，荆涛，柳百成, “镁合金枝晶形貌的相场方法模拟”，《金属学报》，2008.Vol.44, No.4,pp483-488（SCI-IDS 306TY，EI 20082611336611）
11. 朱圣焱，荆涛,“摇枕与侧架铸件的热裂纹数值模拟研究”, 《中国铸造装备与技术》, 2008 No.2，p28-31
12. 张辉，万柳军，荆涛，“汽车轮毂低压铸造凝固过程模拟研究”，《特种铸造及有色合金》，2006 Vol26, No.7,p409-411
13. 万柳军, 张辉，荆涛，“低压铸造汽车轮毂充型过程数值模拟研究”，《热加工工艺》，2005, No.12,p27-29
14. 赵红兆, 荆涛，柳百成, “铝合金三维枝晶生长相场模拟”，《金属学报》，2005.Vol.41, No.5,pp491-495（SCI-IDS 933QV）
15. REN Yu-Fu, JING Tao, XIONG Shou-Mei,“Internet-based Post-processing Technology For Casting CAE System”, Proceedings of 6th Pacific Rim International Conference on Modeling of Casting & Solidification Process, pp 437-444, Auguest 8-11, 2004, Taiwan, China
16. Zhao Daiping, Jing Tao, Liu Baicheng, “Computer Simulation of 3-Dimensional Dendrite Growth Using Modified Phase Field Method”, ISIJ International, 2003.Vol.43, No.7, pp1095-1099（SCI-IDS 703CY）
17. 宋永恒，荆涛， “基于Pro－E的三维铸造工艺工装CAD/CAE系统研究”， 《模具工程》, 2001 Vol.9, p8-12
18. ZHOU Jian, JING Tao，“Integration of CAD/CAE System for Casting Process Design”， Tsinghua Science and Technology,2003.Vol.8,No.1,pp117-120（EI03307568436）
19. X. D. Liu*, T. Jing and B. C. Liu,“ Study on the Web-based Casting CAE System”, 5th Pacific Rim International Conference on Modeling of Casting & Solidification Process, January 20-23, 2002, Nagoya, Japan(also published by International Journal of Cast Metals Research, Vol.15, No.4, 2003. p421-425. SCI-IDS 645MG)
20. WANG Xudong, JING Tao, “Three-Dimensions Simulation of Dendritic Growth Using Phase Field Method”, Proceedings of 4th Pacific Rim International Conference on Modeling of Casting & Solidification Process, Seoul, Korea, September 5-8, 1999, p141-146
21. 荆涛, 刘新宇，“并行工程环境下的铸造工艺CAD/CAE系统”， 《特种铸造及有色合金》, 2000 Vol.3, p35-37（EI00095318249）
22. 熊伟,荆涛,“铝合金铸件微观组织模拟的研究”，《兵工学报》，2000.Vol.21,No.4,p350-352