【论文、专利、软件注册权、标准】
论文共计200多篇,SCI、EI收录200多篇次,发明专利30多项,软件著作权20项,标准1项,参加5本专著的编写。
1. Liu, Baolin; Kang, Jinwu; Yang, Xin; Zhang, Bo; Bian, Yi. Effects of hollow sand mold on the microstructure and mechanical properties of a low pressure aluminum alloy casting. Journal of Materials Research and Technology, 2024, 28: 4488-4497
2. Jingying Xu, Jinwu Kang, Lele Zheng, Weimin Mao, Jiwu Wang, Numerical simulation of the directional solidification process with multi-shell mold being gradually immersed in water, Journal of Materials Research and Technology, 2022, 19: 2705-2716
3. Jingying Xu, Jinwu Kang, Weimin Mao. Effect of double-layer-shell sand mold on the residual stress of casting and itself crack tendency. Materials Letters, 2022, 24, 133752
4. Jingying Xu, Jinwu Kang, Lele Zheng, Weimin Mao, Jiwu Wang, Numerical simulation of the directional solidification process with multi-shell mold being gradually immersed in water, Journal of Materials Research and Technology, 2022, 19: 2705-2716
5. Jihao Yi, Jinwu Kang, Tianjiao Wang, Xiang Wang, Tao Feng, Yunlong Feng, Pengyue Wu, Microstructure and mechanical behavior of bright crescent areas in Inconel 718 sample fabricated by selective laser melting, Materials & Design, 2021, 197, 109259.
6. JW Kang, HL Shangguan, F Peng, JY Xu, CY Deng, YY Hu, JH Yi, T Huang, LJ Zhang, WM Mao: Cooling control for castings by adopting skeletal sand mold design, China Foundry, 2021, 18(1):18-28
7. Xiaochuan Zhang, Jiwu Wang*, Jinwu Kang, Yiming Rong, Guoqing Duan, Pengyue Wu, Lele Zheng. The dynamic arch bending Mechanism of flat bridge structure of AlSi10Mg during SLM process. Materials and Design, 2020, 188, 108469
8. Wang, S; Guo, ZP; Zhang X.P., Zhang A.; Kang, JW, On the mechanism of dendritic fragmentation by ultrasound induced cavitation, Ultrasonics Sonochemistry, 2019, 51: 160-165
9. J.H. Yi, J.W. Kang, T.J. Wang, X. Wang, Y.Y. Hu, T. Feng, Y.L. Feng, P.Y. Wu, Effect of laser energy density on the microstructure, mechanical properties, and deformation of Inconel 718 samples fabricated by selective laser melting. Journal of Alloys and Compounds, 2019, 786: 481-488
10. S. Wang , J. Kang*, Z. Guo*, T.L. Lee, X. Zhang, Q. Wang, C. Deng, J. Mi. In situ high speed imaging study and modelling of the fatigue fragmentation of dendritic structures in ultrasonic fields. Acta Materialia. 2019, 165:388-397
11. X. Zhang, J. Kang, Z. Guo , Q. Han, Effect of the forced flow on the permeability of dendritic networks: A study using phase-field-lattice Boltzmann method. International Journal of Heat and Mass Transfer. 2019, 131:196–205
12. Jinwu Kang, Haolong Shangguan, Chengyang Deng, Yongyi Hu, Jihao Yi, Xiang Wang, Xiaochuan Zhang, Tao Huang. Additive manufacturing-driven mold design for castings. Additive Manufacturing, 2018, 22: 472–478
13. S. Wang, J. Kang, X. Zhang, Z. Guo, Dendrites fragmentation induced by oscillating cavitation bubbles in ultrasound field. Ultrasonics, 2018, 83: 26-32
14. Chengyang Deng, Jinwu Kang, Haolong Shangguan, Yongyi Hu, Tao Huang, Zhiyong Liu. Effects of Hollow Structures in Sand Mold Manufactured Using 3D Printing Technology. Journal of Materials Processing Technology. 2018, 255: 516-523
15. Kang, Jin-wu; Ma, Qiang-xian. The role and impact of 3D printing technologies in casting. China Foundry. 2017, 14( 3): 157-168
16. Haolong Shangguan, Jinwu Kang, Chengyang Deng, Yongyi Hu, Tao Huang. 3D-printed shell-truss sand mold for aluminum castings. Journal of Materials Processing Technology, 2017, 250: 247-253.
17. Jinwu Kang and Baicheng Liu, Stereo 3D spatial phase diagrams. Journal of Alloys and Compounds, 2016, 673: 309–313
18. Jiyu Ma, Jinwu Kang, Tianyou Huang, Novel application of ultrasonic cavitation for fabrication of TiN/Al composites, Journal of Alloys and Compounds, 2016, 661(15): 176–181
19. Zhang, Xiaopeng; Kang, Jinwu; Wang, Shuo; The effect of ultrasonic processing on solidification microstructure and heat transfer in stainless steel melt. Ultrasonics Sonochemistry, 2015, 27: 307-315
20. Jinwu Kang, Xiaopeng Zhang, , Shuo Wang, Jiyu Ma, Tianyou Huang. The comparison of ultrasonic effects in different metal melts. Ultrasonics, 2015, 57: 11–17
21. Kang, Jinwu ; Hao, Xiaokun; Nie, Gang; Long, Haimin; Liu, Baicheng, Intensive riser cooling of castings after solidification. Journal of Materials Processing Technology, 2015, 215: 278-286
22. Jinwu Kang, Haimin Long, Yongjie Li, Rui You, Xiaokun Hao, Gang Nie, Tianjiao Wang, Chengchun Zhang, Observation of the Mold-Filling Process of a Large Hydro-Turbine Guide Vane Casting. Metallurgical and Materials Transactions B, 2015, 46(1):337-344
23. Jinwu Kang, Xiaopeng Zhang, Yisen Hu, Jiyu Ma, Yongyi Hu and Tianyou Huang, Ultrasonic Treatment of the 304 Stainless Steel Melt, ISIJ International, 2014, 54 (2): 281–287
24. Jinwu Kang, Chao dong, Xiaokun Hao, Gang Nie, Houfa Shen and Baicheng Liu. A Water Analog Experimental Method for the Diffusion and Distribution of Alloy elements in Liquid Steel during Ingot Filling Process, ISIJ International, 2014, 54 (2): 275–280
25. Liu B.C., Kang J.W., Huang, T.Y. Stress analysis and deformation prediction of a heavy hydraulic turbine blade casting during casting and heat treatment. Materials Science and Technology (United Kingdom) , 2012, 28(7): 808-811
26. Kang J. W., Long H.M., Wang T. J, Huang T. Y. and Liu B.C. Evaluation of distortion of castings. International Journal of Cast Metals Research, 2011, 24(3/4):,228-232
27. 康进武, 聂刚, 喻海良等. 热处理过程大型铸钢件变形的三维动态测量. 金属学报, 2011, 47(5): 535-539
28. Kang J.W., Zhang J.F., Liu B.C., Huang T.Y. Improved thermal stress analysis for castings. International Journal of Cast Metals Research, 2008, 21(1–4): 324-329.
29. Kang J.W., Huang T.Y. , Liu B.C. Review of production status of heavy steel castings and key technologies for their manufacture in china. China Foundry, 2008, 5(1): 1-6.
30. J. Kang, J. Zhang, B. Liu and T. Huang. Improved thermal stress analysis for castings, International Journal of Cast Metals Research, 2008, 21(1–3): 424-429
31. Xu Yan, Kang Jinwu, Huang Tianyou, Hu Yongyi. Thermal Stresses In A Cylinder Block Casting Due To Coupled Thermal And Mechanical Effects, Tsinghua Science And Technology, 2008, 13(2), 132-136
32. Jinwu Kang, Yiming Rong, Modeling and simulation of load heating in heat treatment furnaces, Journal of Materials Processing Technology, 2006, 174(1-3): 109-114
33. Kang J, Rong YK, Wang W. Numerical simulation of heat transfer in loaded heat treatment furnaces, Journal De Physique IV, 2004, 120: 545-553
34. Liu Baicheng, Kang Jinwu,,Zhao Haidong. Study on macro and micro modeling on solidification process of shaped casting, Chinese Journal of Mechanical Engineering, 2002, 15(3): 252-256
35. B.C. Liu, J.W. Kang, S.M. Xiong, A study on the numerical simulation of thermal stress during the solidification of shaped castings, Science and Technology of Advanced Materials, 2001, 2:157-164
36. Kang JW, Chen Y, Xiong SM, et al. Numerical Simulation of Thermal Stress and Deformation of Engine Block Iron Casting, Int J Cast Metal Res, 1999,11 (6): 501-506
37. Kang JW, Liu BC, Xiong SM, Numerical simulation of thermal stress of shaped casting based on rheological model, J Mater Sci Technol, 1999,15 (3): 267-270
38. 康进武,柳百成,3D立体显示铸造过程模拟仿真案例集,清华大学出版社,2014
39. 康进武, 熊守美, 柳百成. 采用多热节和即缩即补方法预测铸钢件缩孔的研究, 铸造, 2000, 49(8): 478-480
40. 熊守美、许庆彦、康进武编著, 铸造过程模拟仿真技术, 北京: 机械工业出版社, 2005
41. 柳百成、黄天佑、熊守美主编.《中国材料工程大典》第10卷材料铸造成形工程, 北京: 机械工业出版社, 2006.01. 445-458,648-679
42. 柳百成, 荆涛, 黄天佑, 熊守美, 李文珍, 许庆彦, 康进武, 铸造工程的模拟仿真与质量控制, , 机械工业出版社, 2001
43. 张晓萍、康进武、吕志刚, 材料加工过程企业管理信息系统, 机械工业出版社, 2000
【专利】
1. 自由镂空镂空铸型的设计方法,康进武,郑乐乐,王建庄,中国发明专利, ZL202010737243.9
2. 基于图像生成自由镂空铸型的设计方法、系统及介质,康进武,徐敬英,毛卫民, 中国发明专利,ZL202111271601.2
3. 一种基于图像的数值模拟后处理方法,康进武,韩晓,王纪武,王建庄,中国发明专利,ZL202111439083.0
4. 镂空铸型或镂空砂芯光滑内腔的设计方法,康进武,郑乐乐,王建庄,中国发明专利,ZL201911395500.9
5. 基于3D打印多层中空壳型实现定向凝固的方法,康进武,易吉豪,中国发明专利,ZL201810414883.9
6. 非密实结构新铸型,康进武,上官浩龙,中国发明专利,ZL 201510931371.6
7. 双面复合壳型,康进武,上官浩龙,中国发明专利,ZL201610125566.6
8. 一种加快和均衡大型铸钢件冷却的方法,康进武,黄天佑,胡永沂,中国发明专利,ZL200910218834.9
9. 一种铸件充型流动的测量系统及测量方法,康进武,郝小坤等,ZL201110116704.1
10. 一种利用超声波处理金属熔体的装置和方法,康进武,聂刚,游锐,胡毅森,中国发明专利,ZL201210348369.2
11. 一种大型铸件铸造过程表面温度变化间接测量的方法,康进武, 游锐, 聂刚,郝小坤,龙海敏,黄天佑,付龙,马斌,中国发明专利,ZL201110388031.5
12. 一种测量热处理过程水轮机叶片翘曲变形的方法,聂刚,喻海良,康进武等,中国发明专利,ZL201010245812.4
13. 一种用于冷却大型环形铸件的喷嘴形气流导向装置 ,康进武,喻海良,黄天佑,中国发明专利,ZL200910219085.1
14. 一种用于冷却大型环形铸件的栅形气流导向装置,喻海良,康进武,黄天佑,中国发明专利,ZL200910219084.7
【软件注册权】
1. 有限差分/有限元集成铸件热应力分析系统【简称:FT-STRESS】v1.0, 2017SR388593
2. FT-Thermostress铸件热应力分析软件V1.0,2021SR1387418
3. FT-Hollow core铸造砂芯镂空设计软件v3.0,2021SR1380118
4. 铸造砂型镂空设计软件 V2.0,2020SR1147845
【标准】
中国铸造协会《智能铸型系统》标准第一部分“铸铁件镂空砂型设计规范” (T/CFA 0203012-2023), 2023年发布,第一起草人。