发明专利
发明专利1：一种高硅耐磨铸钢的制造方法，ZL 99105704.X，已授权十几家企业生产应用
发明专利2：金属表面等离子喷涂后激光熔覆制备陶瓷涂层的方法，ZL 981012930.0
主要出版物
[1] 李言祥主编. 《材料加工原理》，清华大学出版社，2005。
[2] Xingming Zhang, Yanxiang Li, Yuan Liu, Huawei Zhang. Fabrication of a bimodal micro/ nanoporous metal by the Gasar and dealloying processes, Materials Letters, 92（2013）448-451
[3] Huawei Zhang, Liutao Chen, Yuan Liu, Yanxiang Li. Experimental Study on Heat Transfer Performance of Lotus-type Copper Heat Sink, International Jouranl of Heat and Mass Transfer, Volume 56, Issues 1–2, January 2013, Pages 172-180
[4] Liu Xingnan, Li Yanxiang, Prediction of melt residual in batch type gas injection foaming process, Journal of Materials Processing Technology, 212（2012）181-187
[5] 陈刘涛, 张华伟, 刘源, 李言祥. “定向凝固多孔铜热沉传热性能的实验研究”，金属学报, 2012: 48(No.3): 329-333
[6] 陈刘涛, 张华伟, 刘源, 李言祥. “定向凝固多孔铜热沉传热性能的理论分析”，金属学报, 2012: 48(No.11): 1374-1380
[7] 刘兴男，李言祥，陈祥. 吹气法制备泡沫铝单炉发泡工艺中熔体剩余比例的预测，中国有色金属学报，Vol.22，No.7 (2012)，1-6
[8] Guangrui Jiang and Yanxiang Li. A Model for Calculating Hydrogen Solubility in Liquid Metals, Metallurgical and Materials Transactions A，2011, 42(4), 1038-1043.
[9] JIANG Guang-rui, LI Yan-xiang, LIU Yuan. Influence of Solidification Mode on Pore Structure of Directionally Solidified Porous Cu-Mn Alloy, Trans. Nonferrous Met. Soc. China，Vol. 21, No.1（2011），88 – 95。
[10] 袁文文，李言祥，陈祥. 穿孔法改进泡沫铝的吸声性能，中国有色金属学报，Vol. 21, No.1, 2011, pp. 0138-0144
[11] 刘兴男，李言祥，陈祥，范雪柳. 气室体积和吹气口数量对泡沫铝孔径的影响，机械工程学报，2011, 47(6): 73-79.
[12] JIANG Guang-rui, LI Yan-xiang, LIU Yuan. Calculating Hydrogen Solubility in Molten Alloys，Trans. Nonferrous Met. Soc. China，Vol. 21, No.5（2011），1130-1135。
[13] 刘兴男，李言祥，陈祥，范雪柳. 吹气发泡工艺中加Ca对颗粒分散程度和泡沫稳定性的影响，中国有色金属学报，Vol.21， No.2 (2011)，392-398。
[14] 范雪柳，陈祥，刘兴男，李言祥. 吹气发制备泡沫铝的性能，中国有色金属学报，Vol.21， No.6 (2011)，1320-1327。
[15] Xiang Chen, Yanxiang Li and Huiming Zhang. Microstructure and mechanical properties of high boron white cast iron with about 4% chromium, J Mater Sci, (2011) 46, 957-963.
[16] Fan Xueliu, Chen Xiang and Li Yanxiang. The structure and Acoustic Properties of Aluminum Foams by Gas Injection Method, Advanced Materials Research, Vols.146-147(2011)，1049-1055.
[17] Liu Yuan, Ding Chao, Li Yan-Xiang, Grain refining mechanism of Al-3B master alloy on hypoeutectic Al-Si alloys, Trans. Nonferrous Met. Soc. China，Vol. 21, No.7（2011），1435 – 1440。
[18] 刘源, 李言祥, 刘润发. 连铸法Gasar工艺中抽拉速率对多孔金属结构影响的理论分析, 金属学报，2010, 46(02):129-134。
[19] Li Yanxiang, Yuan Wenwen and Chen Xiang, The Solidification Structure and Sound Absorbability of A356 Alloy Foams, Materials Science Forum, 656(2010), 994-997.
[20] LIU Xingnan, LI Yanxiang , CHEN Xiang , LIU Yuan , Fan Xueli，FOAM STABILITY IN GAS INJECTION FOAMING PROCESS, J. of Materials Science, 2010, 45(23): 6481-6493.
[21] Chen Xiang and Li Yanxiang. Effect of heat treatment on microstructure and mechanical properties of high boron white cast iron, Materials Science and Engineering A, 528(2010), 771-775.
[22] 刘兴男，李言祥，陈祥，刘源. 吹气法制备泡沫铝工艺中泡沫的稳定性判据，机械工程学报，2010, 46(22): 47-52.
[23] Guangrui Jiang, Yanxiang Li and Yuan Liu. Experimental study on the pore structure of directionally solidified porous Cu-Mn alloy, Metallurgical and Materials Transactions A, 2010, 41(13), 3405-3411.
[24] Chen Xiang and Li Yanxiang. Effects of strontium and boron interactions in Li-7Si alloys, Foundry, Vol. 7, No.4, p. 325-330, 2010.
[25] Zhongli Liu, Xiang Chen, Yanxiang Li, Kaihua Hu. Study of high boron iron-based alloy and its modification, Journal of Iron and Steel Research, 2009, 16（3）：37-42, 54.
[26] X. Wang, Y. X. Li and Y. Liu, Bidirectional Solidification of Metal-Gas Eutectics and Fabrication of Radial-type Porous Magnesium, Inter. J. Cast Metals Research, Vol.22, No.1-4(2009), 200-203.
[27] 刘源，陈敏，李言祥，陈祥. AlxCoCrCuFeNi多主元高熵合金的微观结构和力学性能. 稀有金属材料与工程，2009（09）1602-1607。
[28] 袁文文，陈祥，刘源，李言祥. 熔体发泡法批量制备泡沫铝板材关键技术的研究，稀有金属材料与工程，2009（S3）：306-310。
[29] X. J. Sun and Y. X. LI, X. Chen. Identification and evaluation of modification level for compacted graphite cast iron, J. Materials Processing Technology, 200（2008）471-480.
[30] 蒋光锐，刘源，李言祥，苏彦庆，郭景杰. 氢在合金熔体中溶解度的计算模型，金属学报，2008，44（2）：129-133。
[31] Zhongli Liu, Yanxiang Li, Xiang Chen，Kaihua Hu. Study on microstructure and mechanical properties of high boron white cast iron, Materials Science and Engineering A, 486（2008）112-116.
[32] Zhongli Liu, Xiang Chen，Yanxiang Li, Kaihua Hu. Effect of Chromium on microstructure and properties of high boron white cast iron, Metallurgical and Materials Transaction A, Vol.39, No.3 (2008) 636-641.
[33] Y. X. Li, Z. L. Liu, X. Chen, Development of boron white cast iron, Inter. J. Cast Metals Research, Vol.21, No.1-4 (2008), 67-70.
[34] 王雪，李言祥，刘 源. 熔体流动对镁/氢共晶二维定向凝固的影响, 金属学报，2008，44(9)：626-630。
[35] X. J. Sun and Y. X. LI, Influence of Blast-induction Duplex Melting Process on the Melt Quality and Solidification of Gray Cast Iron, Inter. J. Cast Metals Research, Vol.20, No.5(2007), 240-245.
[36] Chen Xiang, Li Yanxiang. Fracture toughness improvement of austempered high silicon steel by titanium, vanadium and rare earth elements multi-element modification. Mater. Sci. & Eng A. 444（2007）298~305
[37] Wang Xue, Li Yanxiang, Liu Yuan. Structural Features in Radial-type Porous Magnesium Fabricated by Bidirectional Solidification. Mater. Sci. & Eng A. 444（2007）306-313.
[38] Wan Jiang, Li Yanxiang, Liu Yuan, Spatial distribution of pores in lotus-type porous metal, J. of Materials Science, 42 (2007) 6446-6452
[39] X. J. Sun, Y. X. LI and X. Chen. Controlling Melt Quality of Compacted Graphite Iron, Mater. Sci. & Eng. A. 466（2007）1-8.
[40] 王雪，李言祥，刘源. 金属/气体共晶二维定向凝固放射状规则多孔Mg的结构特征，金属学报，2007，43(1)：6-10。
[41] 张华伟，李言祥，刘源.Al-H系定向凝固制备多孔Al. 金属学报，2007，43(1)：11-16。
[42] 张华伟，李言祥，刘源.氢在Gasar工艺常用纯金属中的溶解度，金属学报，2007，43(2)：113-118。
[43] 陈祥,李言祥.高硅铸钢残余奥氏体分布形态及其对力学性能的影响，金属学报，2007，43 (3)：235-239。
[44] 刘仲礼,李言祥,陈祥,胡开华.凝固条件对高硼铁基合金结构和性能的影响, 金属学报，2007，43 (5) 477-481。
[45] 蒋光锐，刘源，李言祥，苏彦庆，郭景杰.多元合金熔体组元活度计算方法的改进，金属学报，2007，43 (5) 503-508。
[46] 张华伟，李言祥，刘源.固/气共晶定向凝固中的工艺判据，金属学报，2007，43 (6)：163-166。
[47] 张华伟，李言祥.金属熔体中气泡形核的理论分析，物理学报，Vol.56，No.8 (2007)，544-551。
[48] 陈敏，刘源，李言祥，陈祥，多主元高熵合金AlTiFeNiCuCrx的微观结构和力学性能，金属学报，2007，43（10）：1020-1024。
[49] Yanxiang LI, Yuan LIU, Huiyuan GENG, Dake NIE, Synthesis and Cladding of Ni3Al Intermetallic on Steel Substrate by Laser Controlled Reactive Synthesis， J. of Materials Processing Technology. 171（2006）405-410
[50] CHEN Xiang, GENG Huiyuan, LI Yanxiang，Study on the eutectic modification level of Al-7Si Alloy by computer aided recognition of thermal analysis cooling curves，Mater. Sci. & Eng. A. 419（2006）283-289.
[51] Yuan LIU, Yanxiang LI, Huawei ZHANG and Jiang WAN. Evolution of Pore Size Distribution and Mean Pore Size in Lotus-type Porous Magnesium Fabricated with Gasar Process，J. of Materials Science & Technology, Vol.22, No.3 (2006), 306-310.
[52] Yuan LIU, Yanxiang LI, Jiang WAN and Huawei ZHANG.. Metal-gas eutectic growth during unidirectional solidification. Metallurgical and Materials Transactions A, v 37, n 9, September, 2006, p 2871-2877
[53] CHEN Xiang, LI Yanxiang，Effects of Ti, V, and rare earth on the mechanical properties of austempered high silicon cast steel，Metallurgical and Materials Transactions A, v 37, n 11, November, 2006, p 3215-3220
[54] 王雪，李言祥，刘源. 金属/气体共晶二维定向凝固制备放射状规则多孔Mg, 金属学报，2006，42（10），
[55] 陈祥，耿慧远，李言祥. B, Sr联合处理Al-7Si合金及细化变质效果评估，金属学报，2006，42（11），1130-1136.
[56] 张华伟, 李言祥, 刘源. Gasar工艺获得均匀藕状多孔结构的气压选择，金属学报，2006，42（11），1171-1176.
[57] 张华伟, 李言祥, 刘源. 藕状规则多孔Cu气孔率的理论预测，金属学报，2006，42（11），1165-1170.
[58] Li Zhenhua, Li Yanxiang, Effect of Sb on the Graphite Morphology and Mechanical Properties in Heavy Section Ductile Iron, Materials Science Forum, Vol.475-479 (2005) 2769-2972.
[59] 张华伟，李言祥，刘源.Gasar工艺中金属－氢二元相图的研究，金属学报，2005，41（1）：55-59.
[60] Yanxiang Li and Qiang Wang, Intelligent Evaluation of Melt Iron Quality by Pattern Recognition of Thermal Analysis Cooling Curves, J. of Materials Processing Technology，161 (2005) 430-434.
[61] Geng Huiyuan，Li Yanxiang，Chen Xiang and Wang Xue, Effect of Boron on the eutectic solidification process of hypoeutectic Al-Si alloys，Scripta Materiala， 53（2005）69-73.
[62] LIU Yuan, LI Yanxiang, WAN Jiang, ZHANG Huawei, Evaluation of Porosity in Lotus-type Porous Magnesium Fabricated by Metal/Gas Unidirectional Coupled Growth under Pressurized Hydrogen, Mater. Sci. & Eng. A 402 (2005) 47-54.
[63] LIU Yuan, LI Yanxiang. Reply to ‘Comments on a theoretical study of the Gasarite eutectic growth’, Scripta. Metall., 2005, 52(2):803-807
[64] LIU Yuan, GUO Jingjie, JIA Jun, LI Yanxiang. Simulation of nucleation and coalescence of second phase droplets during earth-based solidification process of immiscible alloys. Trans. Nonferrous Met. Soc. China..2005,15 (3):479-484
[65] 刘源, 李言祥, 张华伟. 金属/气体共晶定向凝固工艺参数对藕状多孔金属结构的影响, 稀有金属材料与工程, 2005,34(7):1128-1130。
[66] 刘源, 李言祥, 张华伟, 万疆. 藕状规则多孔结构形成的压力条件和气孔尺寸的演变规律, 金属学报, 2005, 41 (8) 886-890.
[67] 陈祥，耿慧远，李言祥. 亚共晶Al-Si合金变质级别的定量金相分析，金属学报, 2005, 41 (8) 891-896.
[68] Li Zhenhua, Li Yanxiang, Evaluation of melt quality and graphite degeneration prediction in heavy section ductile iron, Metallurgical and Materials Transactions A, v 36, n 9, September, 2005, p 2455-2460
[69] 陈祥，李言祥，符寒光. 等温淬火高硅铸钢的断裂韧性，金属学报，2005, 41 (10) 1061-1065.
[70] 刘源, 李言祥, 张华伟. 藕状多孔金属Mg的Gasar工艺制备，金属学报，2004，40（11），1121-1126。
[71] Li Zhenhua, Li Yanxiang, Geng Huiyuan, et al. Study on the Thermal Simulation of Solidification in Heavy Section Ductile iron, J. Mater. Sci. Tech., Vol.19, Suppl.1 (2003) 122-124.
[72] Y. X. Li, X. R. Xu, Q. Wang and B. C. Liu，Evaluating Melt Iron Features by Computer Aided Recognition of Thermal Analysis Cooling Curves, Inter. J. Cast Metals Research, Vol.16, No.1-3 (2003),41-45.
[73] LIU Yuan, LI Yanxiang. Theoretical analysis of bubble nucleation in GASAR materials, Trans. Nonferrous Met. Soc. China, Vol.13, No.4 (2003), 830-834.
[74] LIU Yuan, GUO Jingjie, Jia Jun and LI Yanxiang. Formation mechanism of Al-In immiscible alloy’s microstructure by melt spinning, J. Mater. Sci. Tech, Vol.19, No.4 (2003), 376-378.
[75] 刘源, 李言祥. 难混溶合金宏观偏析形成的数值模拟, 金属学报, Vol.39, No.7(2003), 679-685.
[76] LIU Yuan, LI Yanxiang. A Theoretical Study of the Gasarite Eutectic Growth, Scripta Materiala., 49 (2003), 379-386.
[77] Q.Wang, Y.X.Li, X.C.Li. Grain refinement of Al-7Si alloys and the efficiency assessment by recognition of cooling curves, Metallurgical and Materials Transactions A，Vol.34A, 2003, 1175-1182.
[78] LI Yanxiang, YAO Jiankui, LIU Yuan. Synthesis and Cladding of Al2O3 Ceramic Coatings on Steel Substrates by a Laser Controlled Thermite Reaction, Surface & Coatings Technology, Vol.172, No.1, (2003), 57-64.
[79] Liu Yuan, Li Yanxiang, Guo Jinjie et al. Liquid phase separating mechanism and preparation techniques of immiscible alloys, Trans. Nonferrous Met. Soc. China, Vol.12, No.3 (2002) 357-365.
[80] Liu Yuan, Guo Jingjie, Jia Jun, Li Yanxiang, Zhao Jiuzhong. Microstructure evolution of immiscible alloys during rapid cooling through miscibility gap, Trans. Nonferrous Met. Soc. China, Vol.12, No.2 (2002) 193-199.
[81] Qiang Wang, Kunquan Lu and Yanxiang Li. Abnormal change of the resistivity with temperature for liquid antimony，Chinese Science Bulletin，18 (2001) 35.
[82] Li Yanxiang, Chen Xiang. Microstructure and mechanical properties of austempered high silicon cast steel, Materials Science and Engineering, A 308 (2001), 277-282.
[83] Li Yanxiang, Hu Xiao and Xu Xue Rong. Pattern Recognition of Thermal Analysis Cooling Curves and Quality Evaluation of melt Cast Alloys, J. Mater. Sci. Technol., Vol.17, No.1 (2001), 73-74.