1. Liu Baicheng, Jing Tao etc，《Numerical Simulation and Quality Control for Foundry Engineering》，China Machine Press，October 2000
2. Jing Tao，《Numerical Simulation of Solidification Process》，Publishing House of Electronics Industry，May 2002
3. Wang mingyue, Jing Tao and Liu Baicheng, Phase-field simulation of dendrite morphologies and selected evolution of primary α-Mg phases during the solidification of Mg-rich Mg-Al-based alloys, Scripta Materialia, Volume 61, Issue 8, October 2009, Pages 777-780. （SCI-IDS 493EH，EI 20093312255561）
4. En-Yu Guo, Hu-xiaoXie, Sudhanshu S. Singh, Antony Kirubanandham, Tao Jing and Nikhilesh Chawla，“Mechanical Characterization of Microconstituents in a Cast Duplex Stainless Steel by Micropillar Compression”，Materials Science and Engineering A598（2014）98-105. （SCI-IDS AE1ZF，EI 20140617281510）DOI: 10.1016/j.msea.2014.01.002
5. Sansan Shuai, Enyu Guo, Tao Jing, Peter D. Lee, Fast synchrotron X-ray tomography quantification of the dendritic evolution during the solidification of Mg-Sn alloys, Acta Materialia 10/2016; 118:260-269. （SCI-IDS DW8WI）DOI: 10.1016/j.actamat.2016.07.047
6. Changjiang Ni, Gaochun Lu, Qingdong Zhang, Tao Jing, Junjiao Wu, Linlong Yang, Qinfang Wu, Influence of core box vents distribution on flow dynamics of core shooting process based on experiment and numerical simulation, China Foundry, 13(2016), 22-29. （SCI-IDS DN4MJ）DOI: 10.1007/s41230-016-5105-z
7. Kai Zhu, Wenbo Yu, Yann Aman, Tao Jing. Synthesis, microstructure and mechanical properties of a bio-inspired Ti-intermetallic multi-layered/SiCf-reinforced Ti-matrix hybrid composite. Journal of materials science, September 2016, Volume 51, Issue 18, pp 8747–8760. （SCI-IDS DQ2HO）DOI: 10.1007/s10853-016-0139-6
8. Qingdong Zhang, Sida Ma, Tao Jing, Mechanical Properties of a Thermally-aged Cast Duplex Stainless Steel by in Situ Tensile Test at the Service Temperature, Metals 2019, 9, no. 3, 317. （SCI-IDS HT0XI）DOI: 10.3390/met9030317
9. Xiong Wan, Kai Zhu, Yanjin Xu, Baoshuai Han, Tao Jing, In-situ observation of fracture behavior of Ti-aluminide multi-layered composites produced by a hybrid sintering process, Materials 2019，12（9），1568 （SCI-IDS IA7SV）DOI: 10.3390/ma12091568
10. Miao Jiaming，Jing Tao，Liu Baicheng, “Numerical Simulation of Dendritic Morphology of Magnesium Alloys Using Phase Field Method”，《Acta Metallurgica Sinica》，2008.Vol.44, No.4,pp483-488（SCI-IDS 306TY，EI 20082611336611）
11. Zhu Shengyan，Jing Tao, “Study on hot crack for the casting of bolster and side bearer by numerical simulation”, 《China Foundry Machinery and Technology》, 2008 No.2，p28-31
12. Zhang Hui，Wan Liujun，Jing Tao，“Study of Solidification Simulation on Low Pressure Die casting for Automobile Wheel Casting”，《Special Casting and Nonferrous Alloys》，2006 Vol26, No.7,p409-411
13. Wan Liujun, Zhang Hui，Jing Tao，“Study of Mold Filling Simulation on Low Pressure Die Casting for Automobile Wheel Casting”，《Hot Working Technology》，2005, No.12,p27-29
14. Zhao Hongzhao, Jing Tao，Liu Baicheng, “Simulating 3-D dendritic growth of aluminum alloy”，《Acta Metallurgica Sinica》，2005.Vol.41, No.5,pp491-495（SCI-IDS 933QV）
15. REN Yu-Fu, JING Tao, XIONG Shou-Mei,“Internet-based Post-processing Technology For Casting CAE System”, Proceedings of 6th Pacific Rim International Conference on Modeling of Casting & Solidification Process, pp 437-444, Auguest 8-11, 2004, Taiwan, China
16. Zhao Daiping, Jing Tao, Liu Baicheng, “Computer Simulation of 3-Dimensional Dendrite Growth Using Modified Phase Field Method”, ISIJ International, 2003.Vol.43, No.7, pp1095-1099（SCI-IDS 703CY）
17. Song Yongheng，Jing Tao， “Study on 3d CAD/CAE System of Foundry Technology Based on Pro/E”， 《Mould and Die Project》, 2001 Vol.9, p8-12
18. ZHOU Jian, JING Tao，“Integration of CAD/CAE System for Casting Process Design”， Tsinghua Science and Technology,2003.Vol.8,No.1,pp117-120（EI03307568436）
19. X. D. Liu*, T. Jing and B. C. Liu,“ Study on the Web-based Casting CAE System”, 5th Pacific Rim International Conference on Modeling of Casting & Solidification Process, January 20-23, 2002, Nagoya, Japan(also published by International Journal of Cast Metals Research, Vol.15, No.4, 2003. p421-425. SCI-IDS 645MG)
20. WANG Xudong, JING Tao, “Three-Dimensions Simulation of Dendritic Growth Using Phase Field Method”, Proceedings of 4th Pacific Rim International Conference on Modeling of Casting & Solidification Process, Seoul, Korea, September 5-8, 1999, p141-146
21. Jing Tao, Liu Xinyu，“Study on a CAD/CAE System for Foundry under Concurrent Engineering Environment”， 《Special Casting and Nonferrous Alloys》, 2000 Vol.3, p35-37.（EI00095318249）
22. Xiong Wei, Jing Tao,“Study on Microstructure Modelling for Castings of Aluminum Alloy”，《Acta Armamentarii》，2000.Vol.21,No.4,p350-352