1. Kang, J., Wang, J., Han, X. et al. Deep learning based heat transfer simulation of the casting process. Sci Rep, 2024, 14: 29068
2. Kang, Jw., Liu, Bl., Jing, T. et al. Intelligent casting: Empowering the future foundry industry. China Foundry, 2024, 21:409–426
3. Liu, Baolin; Kang, Jinwu; Yang, Xin; Zhang, Bo; Bian, Yi. Effects of hollow sand mold on the microstructure and mechanical properties of a low pressure aluminum alloy casting. Journal of Materials Research and Technology, 2024, 28: 4488-4497
4. Jingying Xu, Jinwu Kang, Lele Zheng, Weimin Mao, Jiwu Wang, Numerical simulation of the directional solidification process with multi-shell mold being gradually immersed in water, Journal of Materials Research and Technology, 2022, 19: 2705-2716
5. Jingying Xu, Jinwu Kang, Weimin Mao. Effect of double-layer-shell sand mold on the residual stress of casting and itself crack tendency. Materials Letters, 2022, 24, 133752
6. Jingying Xu, Jinwu Kang, Lele Zheng, Weimin Mao, Jiwu Wang, Numerical simulation of the directional solidification process with multi-shell mold being gradually immersed in water, Journal of Materials Research and Technology, 2022, 19: 2705-2716
7. Jihao Yi, Jinwu Kang, Tianjiao Wang, Xiang Wang, Tao Feng, Yunlong Feng, Pengyue Wu, Microstructure and mechanical behavior of bright crescent areas in Inconel 718 sample fabricated by selective laser melting, Materials & Design, 2021, 197, 109259.
8. JW Kang, HL Shangguan, F Peng, JY Xu, CY Deng, YY Hu, JH Yi, T Huang, LJ Zhang, WM Mao: Cooling control for castings by adopting skeletal sand mold design, China Foundry, 2021, 18(1):18-28
9. Xiaochuan Zhang, Jiwu Wang*, Jinwu Kang, Yiming Rong, Guoqing Duan, Pengyue Wu, Lele Zheng. The dynamic arch bending Mechanism of flat bridge structure of AlSi10Mg during SLM process. Materials and Design, 2020, 188, 108469
10. Wang, S; Guo, ZP; Zhang X.P., Zhang A.; Kang, JW, On the mechanism of dendritic fragmentation by ultrasound induced cavitation, Ultrasonics Sonochemistry, 2019, 51: 160-165
11. J.H. Yi, J.W. Kang, T.J. Wang, X. Wang, Y.Y. Hu, T. Feng, Y.L. Feng, P.Y. Wu, Effect of laser energy density on the microstructure, mechanical properties, and deformation of Inconel 718 samples fabricated by selective laser melting. Journal of Alloys and Compounds, 2019, 786: 481-488
12. S. Wang, J. Kang*, Z. Guo*, T.L. Lee, X. Zhang, Q. Wang, C. Deng, J. Mi. In situ high speed imaging study and modelling of the fatigue fragmentation of dendritic structures in ultrasonic fields. Acta Materialia. 2019, 165:388-397
13. X. Zhang, J. Kang, Z. Guo , Q. Han, Effect of the forced flow on the permeability of dendritic networks: A study using phase-field-lattice Boltzmann method. International Journal of Heat and Mass Transfer. 2019, 131:196–205
14. Jinwu Kang, Haolong Shangguan, Chengyang Deng, Yongyi Hu, Jihao Yi, Xiang Wang, Xiaochuan Zhang, Tao Huang. Additive manufacturing-driven mold design for castings. Additive Manufacturing, 2018, 22: 472–478
15. S. Wang, J. Kang, X. Zhang, Z. Guo, Dendrites fragmentation induced by oscillating cavitation bubbles in ultrasound field. Ultrasonics, 2018, 83: 26-32
16. Chengyang Deng, Jinwu Kang, Haolong Shangguan, Yongyi Hu, Tao Huang, Zhiyong Liu. Effects of Hollow Structures in Sand Mold Manufactured Using 3D Printing Technology. Journal of Materials Processing Technology. 2018, 255: 516-523
17. Kang, Jin-wu; Ma, Qiang-xian. The role and impact of 3D printing technologies in casting. China Foundry. 2017, 14( 3): 157-168
18. Haolong Shangguan, Jinwu Kang, Chengyang Deng, Yongyi Hu, Tao Huang. 3D-printed shell-truss sand mold for aluminum castings. Journal of Materials Processing Technology, 2017, 250: 247-253.
19. Jinwu Kang and Baicheng Liu, Stereo 3D spatial phase diagrams. Journal of Alloys and Compounds, 2016, 673: 309–313
20. Jiyu Ma, Jinwu Kang, Tianyou Huang, Novel application of ultrasonic cavitation for fabrication of TiN/Al composites, Journal of Alloys and Compounds, 2016, 661(15): 176–181
21. Zhang, Xiaopeng; Kang, Jinwu; Wang, Shuo; The effect of ultrasonic processing on solidification microstructure and heat transfer in stainless steel melt. Ultrasonics Sonochemistry, 2015, 27: 307-315
22. Jinwu Kang, Xiaopeng Zhang, Shuo Wang, Jiyu Ma, Tianyou Huang. The comparison of ultrasonic effects in different metal melts. Ultrasonics, 2015, 57: 11–17
23. Kang, Jinwu ; Hao, Xiaokun; Nie, Gang; Long, Haimin; Liu, Baicheng, Intensive riser cooling of castings after solidification. Journal of Materials Processing Technology, 2015, 215: 278-286
24. Jinwu Kang, Haimin Long, Yongjie Li, Rui You, Xiaokun Hao, Gang Nie, Tianjiao Wang, Chengchun Zhang, Observation of the Mold-Filling Process of a Large Hydro-Turbine Guide Vane Casting. Metallurgical and Materials Transactions B, 2015, 46(1):337-344
25. Jinwu Kang, Xiaopeng Zhang, Yisen Hu, Jiyu Ma, Yongyi Hu and Tianyou Huang, Ultrasonic Treatment of the 304 Stainless Steel Melt, ISIJ International, 2014, 54 (2): 281–287
26. Jinwu Kang, Chao dong, Xiaokun Hao, Gang Nie, Houfa Shen and Baicheng Liu. A Water Analog Experimental Method for the Diffusion and Distribution of Alloy elements in Liquid Steel during Ingot Filling Process, ISIJ International, 2014, 54 (2): 275–280
27. Liu B.C., Kang J.W., Huang, T.Y. Stress analysis and deformation prediction of a heavy hydraulic turbine blade casting during casting and heat treatment. Materials Science and Technology (United Kingdom) , 2012, 28(7): 808-811
28. Kang J. W., Long H.M., Wang T. J, Huang T. Y. and Liu B.C. Evaluation of distortion of castings. International Journal of Cast Metals Research, 2011, 24(3/4):,228-232
29.J. Kang, J. Zhang, B. Liu and T. Huang，Improved thermal stress analysis for castings，International Journal of Cast Metals Research, 2008, 21（1–4）, 324-329（Proceedings of 10th Asian Foundry Congress (AFC10)，Nagoya, Japan, May 21-24, 2008，509-514）
30.Kang jinwu,Yiming Rong, Modeling and simulation of load heating in heat treatment furnaces,Journal of Materials Processing Technology,174(1-3), 2006.05:109-114
31.Kang J, Rong YK, Wang W,Numerical simulation of heat transfer in loaded heat treatment furnaces, 2nd International Conference on Thermal Process Modelling and Computer Simulation, Mar 31-Apr 02, 2003, Journal De Physique Iv, 2004, 120: 545-553
32.Kang, Jin-Wu; Huang, Tian-You; Purushothaman, Radhakrishnan; Wang, Wei-Wei; Rong, Yi-Ming ,Modeling and simulation of heat transfer in loaded continuous heat treatment furnace, Transactions of Materials and Heat Treatment, 25(5), 2004, 764-768
33.Kang J, Rong YK, Wang W., Numerical simulation of heat transfer in loaded heat treatment furnaces，Journal De Physique Iv, 2004, 120: 545-553
34.Liu Baicheng, Kang Jinwu，Zhao Haidong, Study On Macro And Micro Modeling On Solidification Process Of Shaped Casting，Chinese Journal of Mechanical Engineering，2002, 15(3): 525–532
35.B.C. Liu, J.W. Kang, S.M. Xiong, A study on the numerical simulation of thermal stress during the solidification of shaped castings, Science and Technology of Advanced Materials, 2001, 2:157-164
36.Kang JW, Chen Y, Xiong SM, et al.，Numerical Simulation of Thermal Stress and Deformation of Engine Block Iron Casting，The 6th International Symposium on Science and Processing of Cast Iron(SPCI6), Birmingham, USA,1998.9.Int J Cast Metal Res, 1999, 11 (6) : 501-506
37.Kang JW, Liu BC, Xiong SM，Numerical simulation of thermal stress of shaped casting based on rheological model，J Mater Sci Technol 15: (3) MAY 1999，267-270
38.Liu B. C., Kang J. W. And Xiong S.M., Study On Numerical Simulation Of Thermal Stresses During Solidification Of Shaped Casting, The fifth IUMRS International Conference On Advanced Materials，Beijing, June 1999 (keynote)
39.Kang, J. W.; Chen, Y.; Liu, B. C.; et al.，Study on Stress-Strain Simulation of Test Bar by Rheological Model. Model. Cast., Weld. Adv. Solidif. Processes VIII, Proc. Int. Conf. Model. Cast. Weld. Processes, 8th, 899-906. Edited by: Thomas, Brian G.; Beckermann, Christoph. Minerals, Metals & Materials Society: Warrendale, Pa. 1998.