1990-1993, Ph. D., Tsinghua University, Dept. of Mechanical Engineering  

1989-1990, M. S., Tsinghua University, Dept. of Mechanical Engineering

1984-1989, B. S., Tsinghua University, Dept. of Mechanical Engineering      

1993-            Tsinghua University, Lecturer, A/Professor , Professor

1995-1997  Tohoku University, Japan, Visiting scholar

Second Class Awards for Science and Technology Progress from Beijing Municipal Science and Technology Commission（2002）

First Class Awards for Science and Technology Progress from the State Ministry of Education（1998）

Second Class Awards for Science and Technology Progress from the State Ministry of Education（1996）

Research Interests 

Computer Aided Design of Foundry Technology 

Numerical Simulation of Solidification Process

Selected Publications

1. Liu Baicheng, Jing Tao etc，《Numerical Simulation and Quality Control for Foundry Engineering》，China Machine Press，October 2000

2. Jing Tao，《Numerical Simulation of Solidification Process》，Publishing House of Electronics Industry，May 2002

3. Wang mingyue, Jing Tao and Liu Baicheng, Phase-field simulation of dendrite morphologies and selected evolution of primary α-Mg phases during the solidification of Mg-rich Mg-Al-based alloys, Scripta Materialia, Volume 61, Issue 8, October 2009, Pages 777-780. （SCI-IDS 493EH，EI 20093312255561）

4. Miao Jiaming，Jing Tao，Liu Baicheng, “Numerical Simulation of Dendritic Morphology of Magnesium Alloys Using Phase Field Method”，《Acta Metallurgica Sinica》，2008.Vol.44, No.4,pp483-488（SCI-IDS 306TY，EI 20082611336611）

5. Zhu Shengyan，Jing Tao,  “Study on hot crack for the casting of bolster and side bearer by numerical simulation”, 《China Foundry Machinery and Technology》, 2008 No.2，p28-31

6. Zhang Hui，Wan Liujun，Jing Tao，“Study of Solidification Simulation on Low Pressure Die casting for Automobile Wheel Casting”，《Special Casting and Nonferrous Alloys》，2006 Vol26, No.7,p409-411

7. Wan Liujun, Zhang Hui，Jing Tao，“Study of Mold Filling Simulation on Low Pressure Die Casting for Automobile Wheel Casting”，《Hot Working Technology》，2005, No.12,p27-29

8. Zhao Hongzhao, Jing Tao，Liu Baicheng, “Simulating 3-D dendritic growth of aluminum alloy”，《Acta Metallurgica Sinica》，2005.Vol.41, No.5,pp491-495（SCI-IDS 933QV）

9. REN Yu-Fu, JING Tao, XIONG Shou-Mei,“Internet-based Post-processing Technology For Casting CAE System”, Proceedings of 6th Pacific Rim International Conference on Modeling of Casting & Solidification Process, pp 437-444, Auguest 8-11, 2004, Taiwan, China

10. Zhao Daiping, Jing Tao, Liu Baicheng, “Computer Simulation of 3-Dimensional Dendrite Growth Using Modified Phase Field Method”, ISIJ International, 2003.Vol.43, No.7, pp1095-1099（SCI-IDS 703CY）

11. Song Yongheng，Jing Tao， “Study on 3d CAD/CAE System of Foundry Technology Based on Pro/E”， 《Mould and Die Project》, 2001 Vol.9, p8-12

12. ZHOU Jian, JING Tao，“Integration of CAD/CAE System for Casting Process Design”， Tsinghua Science and Technology,2003.Vol.8,No.1,pp117-120（EI03307568436）

13. X. D. Liu*, T. Jing and B. C. Liu,“ Study on the Web-based Casting CAE System”, 5th Pacific Rim International Conference on Modeling of Casting & Solidification Process, January 20-23, 2002, Nagoya, Japan(also published by International Journal of Cast Metals Research, Vol.15, No.4, 2003. p421-425. SCI-IDS 645MG)

14. WANG Xudong, JING Tao, “Three-Dimensions Simulation of Dendritic Growth Using Phase Field Method”, Proceedings of 4th Pacific Rim International Conference on Modeling of Casting & Solidification Process, Seoul, Korea, September 5-8, 1999, p141-146

15. Jing Tao, Liu Xinyu，“Study on a CAD/CAE System for Foundry under Concurrent Engineering Environment”， 《Special Casting and Nonferrous Alloys》, 2000 Vol.3, p35-37.（EI00095318249）

16. Xiong Wei, Jing Tao,“Study on Microstructure Modelling for Castings of Aluminum Alloy”，《Acta Armamentarii》，2000.Vol.21,No.4,p350-352