Phone：010-62782361 Fax：010-62771160 Address：Room 2317, School of Materials Science and Engineering, Tsinghua University, Beijing 100084, China E-mail：firstname.lastname@example.org
Ph.D, Materials Science & Engineering, Tsinghua University, China, 07/2001 B.S, Materials Science & Engineering, Tsinghua University, China, 07/1996
01/2004-present, Associate Professor, School of Materials Science & Engineering, Tsinghua University, China 10/2001-12/2003 Post Doctor Fellowship, Department of Material Science, Ibaraki University, Japan
Phase transformation in steels and alloy Relationship between microstructure and mechanical properties in materials Superalloy and heat-resistant steel in gas turbine Low activation martensitic steel in Fusion reactor Rail-wheel steels in fast speed and heavy haul railway Material design based on Materials Genome
Representative Publications (Optional) C.C. Wang, C. Zhang, Z.G. Yang, Effects of Ni on austenite stability and fracture toughness in high Co-Ni secondary hardening steel, Journal of Iron and Steel Research, International 24.2 (2017): 177-183. C.C. Wang, C. Zhang, J.J. Zhang, Z.G. Yang, W.B. Liu, Microstructure evolution and yield strength of CLAM steel in low irradiation condition, Materials Science and Engineering: A 682 (2017): 563-568. T.L. Achmad, W. Fu, H. Chen, C. Zhang, Z.G. Yang, Effects of alloying elements concentrations and temperatures on the stacking fault energies of Co-based alloys by computational thermodynamic approach and first-principles calculations, Journal of Alloys and Compounds, 694 (2017) 1265-1279. Q.-h. LI, C. ZHANG, C. Hu, C. Hao, Z.G. YANG, Microstructural Evolution of a Hypoeutectoid Pearlite Steel under Rolling-sliding Contact Loading, Journal of Iron and Steel Research, International, 23 (2016) 1054-1060. K. Tong, F. Ye, H. Che, M.K. Lei, S. Miao, C. Zhang, High-density stacking faults in a supersaturated nitrided layer on austenitic stainless steel, Journal of Applied Crystallography, 49 (2016) 1967-1971. K. Tong, F. Ye, M. Gao, M.K. Lei, C. Zhang, Interatomic potential for Fe–Cr–Ni–N system based on the second nearest-neighbor modified embedded-atom method, Molecular Simulation, 42 (2016) 1256-1262. C. Wang, C. Zhang, Z. Yang, J. Zhao, Multiscale Simulation of Yield Strength in Reduced-Activation Ferritic/Martensitic Steel, Nuclear Engineering and Technology, (2016). C. Wang, C. Zhang, J. Zhao, Z. Yang, W. Liu, Microstructure Evolution and Yield Strength of CLAM Steel in Low Irradiation Condition, Materials Science and Engineering: A, 682 (2017) 563-568. Z. Yang, W. Xu, Z. Yang, C. Zhang, H. Chen, S. van der Zwaag, Predicting the transition between upper and lower bainite via a Gibbs energy balance approach, Journal of Materials Science & Technology, (2016). C. Zhang, H. Chen, K. Zhu, C. Zhang, Z. Yang, Effect of Mo Addition on the Transformation Stasis Phenomenon During the Isothermal Formation of Bainitic Ferrite, Metallurgical and Materials Transactions A, 47 (2016) 5670-5674. T.L. Achmad, W. Fu, H. Chen, C. Zhang, Z. Yang, First-principles calculations of generalized-stacking-fault-energy of Co-based alloys, Computational Materials Science, 121(2016) 86-96. W.B. Liu, Y.Z. Ji, P.K. Tan, C. Zhang, C.H. He, Z.G. Yang, Microstructure evolution during helium irradiation and post-irradiation annealing in a nanostructured reduced activation steel, Journal of Nuclear Materials, 479(2016) 323-330. W.B. Liu, N. Wang, Y.Z. Ji, P.C. Song, C. Zhang, Z.G. Yang, L.Q. Chen, Effects of surface energy anisotropy on void evolution during irradiation: A phase-field model, Journal of Nuclear Materials, 479(2016) 316-322. Z.N. Yang, M. Enomoto, C. Zhang, Z.G. Yang, Transition between alloy–element partitioned and non-partitioned growth of austenite from a ferrite and cementite mixture in a high-carbon low-alloy steel, Philosophical Magazine Letters, 96(2016) 256-264. C. Wang, C. Zhang, Z. Yang, J. Su, Y. Weng, Microstructure analysis and yield strength simulation in high Co–Ni secondary hardening steel, Materials Science and Engineering: A, 669(2016) 312-317. C. Zhang, Z. Yang, M. Enomoto, H. Chen, Z. Yang, C. Zhang, Prediction of Ar 3 during Very Slow Cooling in Low Alloy Steels, Isij International, (2016). Z.N. Yang, W. Xu, Z.G. Yang, C. Zhang, S. van der Zwaag, A 2D analysis of the competition between the equiaxed ferritic and the bainitic morphology based on a Gibbs Energy Balance approach, Acta Materialia, 105(2016) 317-327. Z.N. Yang, Y. Xia, M. Enomoto, C. Zhang, Z.G. Yang, Effect of Alloying Element Partition in Pearlite on the Growth of Austenite in High-Carbon Low Alloy Steel, Metallurgical and Materials Transactions A, 47(2016) 1019-1027. H. Chen, C. Zhang, W.B. Liu, Q.H. Li, H. Chen, Z.G. Yang, Y.Q. Weng, Microstructure evolution of a hypereutectoid pearlite steel under rolling-sliding contact loading, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 655(2016) 50-59. H. Chen, Z.G. Yang, C. Zhang, K.Y. Zhu, S. van der Zwaag, On the transition between grain boundary ferrite and bainitic ferrite in Fe–C–Mo and Fe–C–Mn alloys: The bay formation explained, Acta Materialia, 104(2016) 62-71. C. Zhao, C. Zhang, W.Q. Cao, C.Y. Wang, Z.G. Yang, Y.Q. Weng, Variation of microstructure and mechanical properties of medium Mn steels with multiphase microstructure, Materials Science and Technology, (2016) 1-8. C. Zhao, C. Zhang, W.Q. Cao, Z.G. Yang, Variation in retained austenite content and mechanical properties of 0.2 C–7Mn steel after intercritical annealing, International Journal of Minerals, Metallurgy, and Materials, 23(2016) 161-167. W.B. Liu, Y.Z. Ji, P.K. Tan, H. Zang, C.H. He, D. Yun, C. Zhang, Z.G. Yang, Irradiation Induced Microstructure Evolution in Nanostructured Materials: A Review, Materials, 9(2016) 105. P.C. Song, W.B. Liu, C. Zhang, L. Liu, Z.G. Yang, Reversed Austenite Growth Behavior of a 13% Cr-5% Ni Stainless Steel during Intercritical Annealing, Isij International, 56(2016) 148-153. P.C. Song, Y.Z. Ji, L. Chen, W.B. Liu, C. Zhang, L.Q. Chen, Z.G. Yang, Phase-field simulation of austenite growth behavior: Insights into the austenite memory phenomenon, Computational Materials Science, 117(2016) 139-150.
Copyright © 2020 School of Materials Science and Engineering, Tsinghua University All Rights Reserved.